System Cable - Bosch VSS7901/00T Manual De Instrucciones

All manuals and user guides at all-guides.com
7901-79015 | Installation and Operational Manual
3. Fasten the bottom plate of the box with two screws.
4. Fit the circuit board.
5. Now make the connections as described below.
6. IMPORTANT: Adjust the settings of the circuit board switches to
configure the box according to your system. See section
'settings'.
7. Fit the cover and secure the screw holding it.

System cable

For the interconnections between the monitor, accessories and
camera a system cable is supplied. For optimum picture and sound
quality you should always use 4-wire dual twisted-pair cable when
extending the connection (max. 300m/900ft). The cable and plugs are
available in the hobby and professional trade. Pay attention that the
connectors are fixed to the cable corresponding to the figure below.
4
3
2
2-3
Bosch Security Systems | 2004-06
4
3
2
5
4
3
2
5
4-5
3
2
5
2-3
5
4
4-5
EN | 6