GB
Please read this instruction manual
before using the device for the first
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
Technical specifications
Item
Number of LEDs:
Lithium-ion batteries: 3.7 V, 1,200 mAh
Voltage of mains
adapter:
Charging time:
Running hours:
Service life of LED:
Degree of protection: IP 20
Storage temperature: –20 °C to +45 °C
Operating tempera-
ture:
Charging process
Before taking the hand lamp into service for the
■
first time charge it for 6-8 hours.
Fully charge the hand lamp before it is stored
■
for a longer period.
Connect mains adapter with the hand lamp.
■
Switch lamp off during charging.
■
The LED of the adapter changes to RED during
■
charging.
If charging is completed, the adapter LED
■
switches to GREEN.
4
For your safety
0827 940 101
4 x SMD
230 V, 50/60 Hz
approx. 4 hours
approx. 3 hours
up to 50,000 hours
–5 °C to +40 °C
WARNING- Do not look directly into
the light emitting lamp - Risk of eye
injuries!
Use only the original charger for the lamp. A
NON-original charger may damage your lamp.
Disclaimer
The information in these operating instructions can
be changed without prior notice. Würth does not
accept any liability for direct, indirect, accidentally
or other damages or consequential damages which
result from the usage or the application of the infor-
mation in these operating instructions.
Environmental protection
Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the appli-
cable regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmen-
tally friendly manner. Batteries may not be disposed
of with domestic waste. Hand in used batteries at
your supplier or at a battery collecting point.
Technical changes reserved.
We accept no liability for printing errors.
Adolf Würth GmbH & Co. KG, Abt. PFB
Künzelsau: 12.2012