OttLite 979003 Guia De Inicio Rapido

E
D
G
M
B
A
P
Q
R
H
Craft Organizer Lamp
With Up To 3x Dual Magnifier & 360˚ Rotating Tray
979003 97900N
INS110013 REV050511
ENGLISH
With Up To 3x Dual Magnifier & 360
CONGRATULATIONS!
You've purchased the finest in natural lighting
O
technology with your new OttLite
PRODUCT REGISTRATION FORM
F Please complete the enclosed Product
Registration Form and return it today by
mail, or register online by going to:
http://warranty.OttLite.com.
WARNING: To prevent electric shock, make
sure the lamp is not plugged in until all
assembly steps are complete.
LAMP ASSEMBLY
1. Remove lamp from packing and place the
base (A) on a steady surface.
R 2. To install lamp body (B) into base (A), turn
the assembly upside down then install the flat
washer (P) and screw (Q) into the lamp dowel
through the base. Turn clockwise to tighten
H
with a screwdriver until snug. Screewdriver not
J
included. Set the assembly rightside up on a
firm surface.
3. To install the shade (E), align the notch of
the shade with the tab of the socket housing
then push it back into the socket assembly
making sure the shade "snaps" into place.
4. Refer to BULB INSTALLATION AND
REMOVAL to install bulb (C) into lamp. Also,
refer to BULB INSTALLATION AND REMOVAL
for removal and replacement of shade (E).
5. Plug the cord into a standard 120Vac outlet.
6. To turn the lamp on or off depress the
rocker switch (H) located in the cord mounted
power box.
E
7. To adjust the position of shade (E) simply
grasp the shade with one hand while holding
the support arms (G). The shade (E) can rotate
around the socket or move up and down at
socket joint (O).
NOTE: DO NOT try to move the shade (E)
beyond the limits of socket joint (O) as lamp
H
C
damage may occur.
8. To raise or lower the magnifier (D), grasp
the support arms (G) and gently move them
up or down.
9. To rotate the magnifier (D), grasp the sup-
port arms (G) with one hand and move the
magnifier (D) into position. The magnifier can
also be rotated horizontally.
10. The lamp body joint (M) may be tightened
by turning the thumbscrew (J) clockwise. To
prevent damaging the lamp, DO NOT USE
GX7907
Craft Organizer Lamp
Rotating Tray
º
A TOOL to turn the thumbscrew (J) or apply
excessive force.
® product.
11. The socket joint (O) may be tightened by
turning the thumbscrew (F) clockwise. To
prevent damaging the lamp, DO NOT USE
A TOOL to turn the tension nut (F) or apply
excessive force.
E
NOTE: If the magnifier support arm on
body (G) becomes loose, use a coin to
tighten the two knobs (R) located near the
bottom of the support arm. To prevent dam-
aging the lamp, DO NOT OVERTURN the
screws or apply excessive force.
H
C
TUBE INSTALLATION/REMOVAL
1. Make sure that the lamp is not plugged into
an electrical outlet.
2. If the lamp has been in use, allow it to cool
approximately five minutes before proceeding.
3. Rotate the shade (E) so that the notch in the
base of the shade is positioned over the tab
located on the socket assembly.
4. Remove the shade (E) by pulling it straight
out from the socket assembly.
5. To remove a tube (C) already installed in the
lamp, grasp it firmly in your hand, and pull it
straight out of the socket. DO NOT TWIST OR
BEND THE TUBE WHILE REMOVING IT FROM
THE SOCKET.
6. To install a tube (C) in the socket, grasp
the bulb firmly in your hand, position the bulb
so that the pins are aligned with the socket
receptacles then push the tube straight into the
socket until it "snaps" into place.
7. To replace the shade (E), align the notch of
the shade with the tab of the socket housing
then push it back into the socket assembly
making sure the shade "snaps" into place.
Please note that in operation, OttLite
are not dimmable.
Enjoy your OttLite ® Craft Organizer Lamp With
Up To 3x Dual Magnifier & 360° Rotating Tray!
This lighting system is designed for use with
OttLite ® tubes type (style number PL13-E).
Use of other products voids the warranty
and may result in damage to the lighting
system.
For more information on purchasing
replacement tubes/bulbs please go to
www.OttLite.com/replacement13wtube
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO
REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF
THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED. DO
NOT ALTER THE PLUG.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION!
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or its service agent or a similar qualified person in order to avoid a hazard. Indoor use only.
AVERTISSEMENT! IMPORTANTES DIRECTIVES DE
SÉCURITÉ:
CETTE LAMPE PORTATIVE EST MUNIE D'UNE FICHE POLARISÉE (UNE LAME PLUS LARGE
QUE L'AUTRE). CE DISPOSITIF DE SÉCURITÉ DIMINUE LE RISQUE DE CHOCS ÉLECTRIQUES PUISQUE LA FICHE
NE S'INSÈRE DANS LA PRISE QUE D'UN SEUL CÔTÉ. SI ELLE N'ENTRE PAS DANS LA PRISE, INVERSEZ-LA. SI ELLE
N'ENTRE TOUJOURS PAS, CONTACTEZ UN ÉLECTRICIEN QUALIFIÉ. N'UTILISEZ JAMAIS AVEC UNE RALLONGE SAUF
SI LA FICHE S'INSÈRE ENTIÈREMENT. NE MODIFIEZ PAS CE DISPOSITIF DE SÉCURITÉ.
AVERTISSEMENT:
POUR ÉVITER LES CHOCS ÉLECTRIQUE, INSÉREZ LE BOUT LARGE DE LA FICHE
DANS LA GRANDE FENTE ET POUSSEZ JUSQU'AU BOUT.
ATTENTION!
Si le câble ou le cordon souple externe de ce lampadaire est endommagé, celui-ci doit être remplacé exclusive-
ment par le fabricant, son agent de service ou toute personne compétente afin d'éviter tout danger. Pour usage à l'intérieur seulement.
¡ PRECAUCIÓN! INSTRUCCIONES DE SEGURIDAD
IMPORTANTES:
ESTA LÁMPARA PORTÁTIL TIENE UN ENCHUFE POLARIZADO (UNA DE SUS PATAS
® tubes
ES MÁS ANCHA QUE LA OTRA) COMO CARACTERISTICA PARA REDUCIR EL RIESGO DE UNA DESCARGA ELÉCTRICA.
ESTE ENCHUFE ENCAJARÁ EN CUALQUIER TOMACORRIENTE POLARIZADO SOLO DE UNA MANERA. SI EL ENCHUFE
NO CALZA COMPLETAMENTE EN EL TOMACORRIENTE DÉLE LA VUELTA. SI AÚN NO ENCAJA, PÓNGASE EN
CONTACTO CON UN ELECTRICISTA CALIFICADO. NUNCA UTILICE UNA EXTENSIÓN A NO SER QUE EL ENCHUFE
PUEDA SER TOTALMENTE INSERTADO. NO ALTERE EL ENCHUFE.
PRECAUCIÓN:
PARA PREVENIR UNA DESCARGA ELÉCTRICA, HAGA COINCIDIR LA PATA ANCHA DEL
ENCHUFE CON LA RANURA ANCHA, INSERTE TOTALMENTE.
¡ PRECAUCIÓN!
Si el cable o cordón flexible externo de esta luminaria está dañado, debe ser exclusivamente reemplazado por
el fabricante o su agente de servicio o una persona calificada similar a fin de evitar un riesgo. Sólo para uso en interiores.