Mixer Controls; Front Panel; Rear Panel - Akiyama MX-2 Manual De Instrucciones

MX-2

Front Panel

1. Mic Input Gain
2. Treble and Bass EQ
frequency levels of the input channels for good sound.
3. Input fader
(channels) in the mix.
0
4. Replaceable Crossfader
between the two input channels. "Hard left" selects
Channel 1. "Hard right" selects Channel 2. With the
crossfader centered, both assigned channels are live.
Use the crossfader for fast and seamless segues (fades)
from one selected channel to the other.
Note: The crossfader is user replaceable in case of
failure. Simply unscrew the two large screws which
hold it in place, lift it out and disconnect it's cable. Re-
attach the new crossfader and screw the mounting plate
back onto the unit - you're back in business!
5. Mic Input
here.
6. Headphone Input
headphones here.
7. Input toggle switch
active based on what you have connected to the rear
panel input section (phono/line).
8. Channel Cue / Cue Pan
audio to your headphones. Listen here before bringing
up channel faders or moving the crossfader.
9. Headphone Level
10. Master Fader
11. Channel Gain
cleaner sound.

Rear Panel

12. Power Switch
13. Power Connector
here and check the voltage level to match your
country's standard.
14. Fader Start
conjunction with a compatible fader start CD
player. When used with a compatible CD
player, you can use the crossfader to start and
stop the CD player with the slide of the fader.
The fader start switch activates the fader start
feature. When in the ON position, the fader
start allows the fader to return automatically
to preset digital CUE POINTS on your
compatible CD Player.
15. Stereo Main Outputs
16. Line Inputs
HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, laser discs, tuners, even synthesizers or other
mixing consoles.
17. Phono Inputs
the high-quality RIAA phono pre-amplifiers. Use this position only for turntables. Line level sources will
overload the sensitive phono pre-amps and will cause distortion.
18. Grounding lug
ground cable.
All manuals and user guides at all-guides.com
–Adjusts microphone input level.
- Adjusts the high and low
- Controls individual source levels
- Achieves clean segues
– Insert your Microphone with ¼" plug in
– Insert in the ¼" plug for your
- Selects which source will be
- Used to preview channel
–Adjusts cue volume.
- Controls the overall output level.
– Adjusts the pre-fader volume for
– turns unit off and on.
- Plug in power adapter
– This function works in
- Unbalanced RCA connectors controlled by the Master fader.
- Unbalanced RCAjacks for connecting stereo audio from line level sources such as CD players,
– Plug your turntables in here. When these connectors are used, your signal is fed directly to
- for turntable connection. Always use this connection when using standard turntables with

MIXER CONTROLS

11 11
channel 1
mic
1 1
2 2
min max min
mic
level
high
-10dB 12dB -26dB
high
low
7 7 -10dB 12dB -26dB
low
3 3
channel 2
10
9
8
7
6
5
4
3
2
1
0
4 4
fader
start 1
6 6
5 5
mic
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AKIYAMA. 08191 BARCELONA (SPAIN)
CAUTION, RISK OF ELECTRIC SHOCK, DO NOT OPEN.
ATENTION: TO REDUCE RISK OF ELECTRIC SHOCK DO
N O T O P E R AT E I N S I D E T H E E Q U I P M E N T. F O R
MAINTENANCE CONTACT YOUR DEALER OR QUALIFIED
PERSONNEL.
remote
fader fader
start 2 start 1
12 13 14 15 16
MX-2
channel 2
master
max min max min max
gain gain master
level
high
min max
12dB -26dB 12dB CUE
cue
level
low
ch1 ch2
12dB -26dB 12dB
cue
pan
on
channel 1
10
9
8
7
6
5
4
3
2
1
0
Master Output dB
fader
start 2
heaphones
17 18
10
9
8
8