Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Powering Up
Plugging In and Power On
1
Plug the DVD player's electrical plug into a wall
socket or power strip.
2
Press the STANDBY / ON button on the front panel,
or the POWER button on the remote control to turn
the DVD recorder on.
3
When the DVD player's splash screen appears on
your TV, you're ready to go!
Time and Date Settings
The recorder uses the Time and Date values to
determine when to begin and end Scheduled
Recordings.
1
Press
SETUP
to enter the SETUP MENU.
5 6
2
Use the
/
keys to select GENERAL, press
5 6
ENTER. Use the
/
press ENTER.
3
Move to the field to be edited using the
5 6
Use the
/
keys to increase or decrease the
4
value of the field.
5
To exit a field using the
6
Press
RETURN
to exit the CLOCK SETTINGS
MENU.
Note: When entering the Date and Time setting, you
can use the Number buttons to input the date or time
information.
Select Time Format from the menu and press the
5 6
key. Use the
/
keys to select the;
! Time Format - 12HR or 24HR. 12HR mode is
the normal time system used in the USA, relying
on the use of AM /PM to indicate night or day. In
24HR mode, the AM/PM designation is not used,
with 12:00 indicating noon time and 24:00
indicating midnight.
All manuals and user guides at all-guides.com
TM
keys to select
Clock Setting,
3 4
/
keys.
3 4
/
keys
4
+
Auto Scanning Channels
Once your Antenna or Cable TV input is connected to
the connector on the back of the unit, you can setup the
recorder's built-in TV Tuner by auto-scanning for
available channels and then adding or deleting the
channels you choose.
This is the easiest way to fill your channel list with those
channels available in your area. The unit scans for
channels automatically. When complete, press
to exit.
1
Press the
SOURCE
select TUNER as the SOURCE. Press
2
Press
SETUP
use the
press
ENTER
. Select TV Signal, press
Choose the signal type available to you unit (Air or
Cable). Press
ENTER.
3
Select Automatic Search. Press
scans for channels automatically. When complete,
press
SETUP
to exit the Setup menu.
Note:
The
SETUP
- General - Tuner options can only
be accessed / changed when you have selected TUNER
from the SOURCE options.
Restore Defaults
Choose this option to reset factory settings such as
chapter marker, however it will not reset the password
nor channels found with the Automatic Search feature.
Note: remove any discs inside the disc tray and select
the SOURCE as DVD to be able to select User Defaults.
Switching to TV Mode
Once you have configured your channels, you can begin
using the recorder's built-in TV Tuner for Recording or
simply watching your favorite programs.
1
When the unit is first turned on, the DVD Playback
mode is selected by default. Press
use the
ARROW
and
Tuner mode.
5 6
2
Use the
/
keys to change channels while
watching TV. Alternatively, you can enter a channel
number directly with
ENTER
.
To return to DVD Playback mode, press the
SOURCE
key and select DVD.
12
Quick Start Guide
Quick Start Guide
SETUP
3 4
key and use the
/
keys to
ENTER
.
5 6
/
keys to select General,
ENTER.
ENTER.
The unit
SOURCE
and
ENTER
keys to switch to TV
NUMBER
keys, and press
Publicidad
Capítulos
Tabla de contenido
