Publicidad
Step 5
Turn three BLACK 9/16" FLAT HEAD SCREWS (32S) into the
å
MODESTY PANEL (G) until the shoulders of the SCREWS rest on
the surface of the MODESTY PANEL.
NOTE: Do not overtighten the SCREWS.
å
Slide a MODESTY PANEL MOLDING (S) onto the MODESTY
å
PANEL (G). Line up the groove in the MOLDING over the heads of
the SCREWS in the MODESTY PANEL.
NOTE: If the MOLDING comes up off of the SCREWS, remove it
å
and slide it on again. The MOLDING should be centered
over the MODESTY PANEL.
Turn the MODESTY PANEL (G) over and
å
repeat this step to the other surface
of the MODESTY PANEL.
S
www.sauder.com/services
S
G
S
419954
BLACK 9/16" FLAT HEAD SCREW
(6 used in this step)
G
Apply pressure with your hands as you
guide the MOLDING over the SCREWS
and onto the MODESTY PANEL.
32S
32S
Shoulder
Page 9
Publicidad
