Noise Information; Technical Data; Declaration Of Conformity; Starting Operation - Bosch GHG 600 CE PROFESSIONAL Instrucciones De Servicio

OBJ_BUCH-228-001.book Page 11 Thursday, August 31, 2006 10:46 AM

Noise Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of the
unit is 70 dB(A).

Technical Data

Hot Air Gun
Article number
Rated power input
Temperature at the
nozzle outlet (approx.)
Air flow
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the standards or stand-
ardization documents:
EN 60335 according to the provisions of the direc-
tives 73/23/EG, 89/336/EEC.
94
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
23.08.2006, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
1 609 929 K12 • 31.8.06
Operation

Starting Operation

GHG 600 CE
Switching On and Off
PROFESSIONAL
To switch on the power tool, press the On/Off switch
0 601 942 1..
4 to position I or II.
W 2000
To switch off the power tool, press the On/Off
switch 4 to the 0 position.
°C 100–600
Selecting the Air-volume Level
l/min 350/550
With the On/Off switch 4 it is possible to select
between two air-volume levels:
Hot-air level I:
kg 0.6
Hot-air level II:
/ II
A reduced air-volume level may be required in certain
cases, e.g., to avoid overheating the workpiece sur-
roundings or to avoid displacing the workpiece if the
air jet is too strong.
A higher air-volume level heats up the workpiece more
quickly and the hot-air gun can be held at a greater
distance from the workpiece.
Setting the Temperature
Infinitely variable temperature control of the air jet is
possible with the thumbwheel 3.
The marked thumbwheel positions correspond with
the following temperature ranges:
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V can
also be operated with 220 V.
350 l/min
550 l/min
Thumbwheel Position Temperature in °C
1 100–120
2 210–250
3 300–340
4 420–450
5 500–550
6 570–600

English | 11