Setting The Volume - Star Lab ErgoOne Manual De Instrucciones

2.2 Setting the Volume

Open the volume adjustment catch by
pulling up the volume control button
(Fig. 1), until you hear a click. Turn the volume
control button
aspirated volume, or counter clockwise to
increase it. The set volume is shown in the
four-step volume display
bottom, with a white line indicating the
decimal point. When increasing the volume
setting, pass the required value by 1/3 of a
turn and then slowly decrease to reach the
volume, making sure not to go beyond the
required volume. After you have finished
setting the volume, push the volume control
button back to its lock position until you
1
hear a click. The pipette is now ready to use.
Please note the minimum
and maximum volume
range of your pipette (Ta-
ble 1). You have reached
the end point of the vol-
ume adjustment when it
becomes more difficult to
turn the button and you
can hear a clicking sound.
Do not use excessive force!
Examples of typical volume displays:
10µl Pipette
10.00µl
4
· ErgoOne · User Manual
clockwise to reduce the
1
from top to
4
ErgoOne
2.5µl
10µl
20µl (micro cone)
20µl (standard cone)
100µl
200µl
300µl
1000µl
5000µl
Table 1
0.50µl 200.0µl
1
Fig. 1
Volume range ErgoOne
model Volume range (min./ max.)
®
200µl Pipette
20.0µl
®
0.1 – 2.5µl
0.5 – 10µl
2 – 20µl
2 – 20µl
10 – 100µl
20 – 200µl
30 – 300µl
100 – 1000µl
500 – 5000µl
1000µl Pipette
1000µl
Colour code
Red
Red
Red
Yellow
Yellow
Yellow
Green
Blue
Violet
100µl