Replacement Of The Valves - MSA Vautex Elite ET Trainer Manual Del Usuario

MSA
5.8.

Replacement of the Valves

3
2
1
Suite valve
Fig 6
1 Ring nut
2 Slip ring
3 Gasket
Removing the Valve
(1) Take the prechamber off the valve to be removed.
(2) Open the suit and expose from the inside to reach the valve.
(3) Use one hand to grip the valve housing from the outside and the other to unscrew the ring
nut from the valve housing inwards using a valve spanner.
Fitting the Valve
(1) Insert the ring nut with the slip ring correctly fitted from inside through the head strap hole,
the gasket opening and the valve hole on the suit shell.
(2) Screw the valve housing onto the ring nut from the outside.
(3) Use one hand to grip the valve housing from the outside and the other to screw on the ring
nut from the inside to the valve housing using a valve spanner.
The torque must be 250 Ncm.
(4) Fit the valve disc.
(5) Mount the prechamber by overstretching whereby the angled part is pointing in the
direction of the boot.
GB
6
5
4
4
5
6
Vautex Elite ET Trainer
Valve housing
Valve disc
Prechamber
MAINTENANCE
17