Switching Off - Carmen CEB01WH Manual De Instrucciones

• Evenly spread the electric underblanket over your mattress, starting at the foot end.
Fasten the electric blanket with the elastic bands around the corners of the mattress.
Approximately, the cord should be at shoulder height. The electric underblanket can
be used on both sides.
• First connect the switch to the connection point in the blanket by connecting the plug.
• Then insert the plug in the socket.
• Then, as usual, lay the fitted sheet over the bed, so that the electric underblanket is
between the mattress and the fitted sheet. Each time you make the bed, check that the
electric underblanket is flat and properly spread, before you switch it on.
CAUTION!
Make sure the electric underblanket is spread out fully flat and does not fold
or crumple during use. We recommend switching on the electric underblanket
about 15 minutes before you go to sleep and covering it with a duvet to prevent
the heat from escaping.
Slide the position button from position 0 to position 1 or 2 to switch on the electric underblanket.
In activated condition, the indication light is illuminated.
Position 0: OFF
Position 1: minimum heating
Position 2: maximum heating
ATTENTION
• The electric underblanket heats up the fastest when you first switch on the highest temperature level.
WARNING:
If the electric underblanket is used for several hours, we
recommend setting the lowest heating position (position 1) to
prevent the user from overheating and thereby any potential
burns to the skin or heat stroke.
Slide the position button to position 0 to switch off the electric underblanket. The indication light is no longer illuminated.
ATTENTION
If the electric underblanket is not used for a number of days, slide the position button downwards to switch off
the electric blanket and remove the plug from the socket. Then disconnect the switch from the electric underblanket
by removing the plug.
Use
Switching on
Setting the heating position

Switching off

19 • EN
150 cm
80 cm