Winter Storage; Long Term Storage - Briggs & Stratton 1800 PSI Manual Del Operario

Pump and Motor Maintenance
This pressure washer does not require any maintenance on
the pump or motor. Both assemblies are pre-lubricated and
sealed, requiring no additional lubrication ever.
After Each Use
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Follow these procedures after every
use:
1. Flush detergent system by lifting cleaning tank lid,
removing tank from pressure washer and dumping
solution from tank.
2. Rinse cleaning tank out with fresh clean water. Fill tank
with clean water.
3. Dump remaining water out of tank and run pressure
washer with adjustable nozzle set for low pressure.
Flush for one or two minutes.
4. Dump remaining water out of cleaning tank. Push tank
back into pressure washer base. Reinsert detergent
hose and secure tank lid on tank.
5. Turn master ON/OFF switch to OFF and turn off water
supply. Point gun in a safe direction, press trigger lock
(red button) and squeeze trigger to relieve trapped
pressure. After a few moments, release trigger and
engage trigger lock on spray gun.
6. Disconnect hose from spray gun. Drain water from
hose, gun, and nozzle extension. Use a rag to wipe off
the hose.
7. Rewind high pressure hose onto hose reel.
8. Store unit in a clean, dry area. If storing for more than
30 days see Long Term Storage.

Winter Storage

To protect the unit from freezing temperatures:
1. Empty and flush as described in After Each Use.
2. Add clean fresh water to cleaning tank until it is half
full. Reinstall tank in pressure washer base and insert
detergent hose and lid into tank.
3. Store unit in a clean, dry area.

Long Term Storage

If you do not plan to use the pressure washer for more than
30 days, you must prepare the unit for long term storage.
Other Storage Tips
1. Cover unit with a suitable protective cover that does not
retain moisture.
2. Store unit in a clean and dry area.
15