Habitat Paola Manual De Instrucciones página 2

EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children out of the mounting area. Leave the plastic
bags out of reach. Small parts are a choking hazard.
Materials
2 seat sofa and armchairs
Cover: 100% Olefin (100% polypropylene).
Padding of back cushions: polyurethane foam 18 kg/m
Padding of seat cushions: polyurethane foam 20 kg/m
Structure and feet: aluminum powder coated.
Low table
Top and feet: aluminum powder coated.
Assembly instruction
Before beginning assembly, identify all components using the manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you want
to install.
Assemble on a clean, flat surface.
Check that the proper assembly before each use.
Over time, the fasteners may lose their effectiveness. Periodically
check for loose screws. Retighten if necessary.
Recommendations for use
These products are designed for outdoor use.
It is recommended to cover or store the products in a clean and dry
place away from the bad weather and winter.
Store the cushions in a clean and dry place away from the bad
weather and winter.
Do not leave the products in contact with puddles or on wet ground.
Do not leave stagnant water on the products.
Do not stand on the products.
Do not sit on the table.
Do not sit on the armrests.
Beware of sharp objects.
The table is not meant to be used with a parasol.
Otherwise, it must be used with a foot sufficiently ballasted parasol.
Maintenance
Aluminum
Remove dust regularly with a dry cloth.
Clean with dishwashing liquid and wipe with a clean dry cloth.
In order not to damage the surface, it is recommended not to file a
hot object or wet directly on the table.
Do not use magazines or newspapers as a mat. The ink used may
leave traces that can stain permanently the table surface.
To avoid the appearance of marks, do not leave any object immobile
for more than 2 months. Sponge up spills immediately with a cloth.
Then wipe the surface with a clean, dry cloth. Never allow a layer of
moisture to remain on the surface of the products for long periods of
time, especially in bright sunlight.
Avoid contact with abrasive materials that may damage the surface.
Do not place the product near a heat source (radiator, fireplace ...)
nor a moisture source. Heat and humidity may damage the product.
Do not use abrasive products.
Maintain with circular movements.
Cover and store the products in a clean and dry place away from the
bad weather and winter.
Paola - 05/2021
Cushions
Vacuum or brush the cloth once a week. Dust accumulation accele-
rates wear and the colors from fading.
Spills should be removed immediately with a clean and dry dabbing
to absorb the liquid. Do not rub, it may damage the fabric. Variations
in color between the surfaces cleaned and uncleaned might appear.
Avoid direct and prolonged exposure of the product to sunlight. The
colors may fade.
Do not place the product near a heat source (radiator, fireplace...) nor
a moisture source. The heat and humidity can damage the product.
. Do not use abrasives.
3
. Return and tap regularly the cushions so they do not wear out and
3
do not get dirty unevenly.
To clean the covers and cushions, please follow the maintenance
conditions mentioned on the label sewn inside each cover.
BC
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat.eu or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
1
Keep the label with lot number, it may be useful in case of
complaint.