EN
This manual contains important information that should be kept
for future reference.
For domestic use only.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking ha-
zard.
Materials
Structure and base: painted aluminum.
Tray, slats: natural teak.
Cushion cover: 100% Sunbrella acrylic.
Upholstery cushions: polyurethane foam 25 kg / m
Assembly Instructions
Before starting the assembly, identify all components using the
manual.
In order not to misplace components, do not discard the packaging
until complete assembly is completed.
This product must be mounted by an adult.
Mount on a clean, level surface.
Plan to assemble the furniture as close to the installation location
as possible.
Recommendations for use
This product has been designed for outdoor use.
It is recommended to cover or store the product in a clean and dry
place away from the weather and winter.
Store the cushions in a clean, dry place away from the weather
and winter.
Do not leave the product in contact with puddles or on wet ground.
Do not leave stagnant water on the product.
Do not stand on the product.
Beware of sharp objects.
Maintenance
Do not place the product near a heat source (radiator, chimney,
etc.) or a source of moisture. Heat and moisture can damage the
product.
Do not use abrasive products.
Part in teck
Before first use, impregnate the top with a special teak oil.
After a season outside, the appearance of the wood can vary to
become silver gray under the action of the sun or blackish super-
ficially because of moisture, this is part of the natural evolution
of wood.
To make it shine, lightly sand the furniture and soak it with special
teak oil. It is advisable to repeat this operation at the beginning and
at the end of the summer.
After each application, let the product soak into the wood before use.
Dust regularly with a soft, dry cloth.
In order not to damage the surface, it is recommended not to de-
posit a hot or humid object directly on it.
Sponge up spills immediately with a cloth. Then wipe the surface
with a clean, dry cloth.
To avoid the appearance of marks, do not leave any object immo-
bile for more than 2 months.
Never leave a layer of moisture on the product for long periods of
time, especially if the light is bright.
Do not place the product near a heat source (radiator, chimney,
etc.) or a source of moisture. Heat and moisture can cause cracks
and deformations.
Maintain with movements in the direction of the wood fibers.
Part in aluminium
Nikky - 01/2019
Dust regularly with a dry cloth.
Clean with dishwashing liquid and wipe with a damp cloth.
To avoid the appearance of marks, do not leave any object immo-
bile for more than 2 months. Sponge up spills immediately with a
cloth. Then wipe the surface with a clean, dry cloth.
Never leave a layer of moisture on the product for long periods of
time, especially if the light is bright.
Avoid contact with abrasive materials that may damage the sur-
face of the product.
Cushions
Vacuuming or brushing upholstery once a week: Dust accumula-
tion accelerates wear and dulling of colors.
Sponge up spilled liquids immediately with a clean, dry, dabbing
.
3
cloth to absorb the liquid.
Do not rub, it may damage the fabric. Color variations between
cleaned and uncleaned surfaces may appear.
Avoid direct and prolonged exposure of the product to solar radia-
tion: colors may fade.
Flip and pat the cushions regularly so that they do not wear out
and do not get dirty unevenly.
To clean the covers and cushions, please follow the maintenance
conditions mentioned on the label sewn inside each cover.
If in doubt, contact a professional for cleaning.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat.eu or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE
1
Keep the label with lot number, it may be useful in case
of complaint.