Tabla de contenido
Publicidad
set operation mode <AP |repeater| client | ad-hoc |bridge_infra|
wds_bridge | wisp | router>
Propósito: fija o cambia el modo de operación
Ejemplo:
Command> set operation mode AP
Operation mode is already setting!
Command> set operation mode wds_bridge
System should be reboot...
Are you sure ? ( y/n ) : y
set <wan | lan> <webservice | ping> <enable |disable>
Propósito: activa o desactiva ping response o el sevidor web del lan/wan
Ejemplo:
Command> set lan ping enable
set lan ping already enable
set lan ip <ipaddress> sm <netmask> gw <gateway> dns <dns server>
Propósito: fija el IP del LAN como IP, Subnet mask, gateway, y el sevidor
DNS
Ejemplo:
Command> set lan ip 192.168.1.1 sm 255.255.255.0 gw 192.168.1.254 dns
168.95.1.1
killall: dnsmasq: no process killed
LAN IP address :
Netmask
Gateway
DNS server
set <enable | disable>
Propósito: activa o desactiva la interfaz inalámbrica
Ejemplo:
Command> set enable
Radio1 enabled
AirLive AIRMAX5 User's Manual
192.168.1.1
:
255.255.255.0
:
192.168.1.254
:
168.95.1.1
104
6. Command Line Interface
Publicidad
Tabla de contenido
