Vision TM-ST2 Manual Del Propietário página 4

INSTALLATION:
1. FIX WALL PLATE When fixing to stud wall you need to position the plate over stud. The
projector lens should be at least 300mm above the top edge of the screen. Check projector
manual for the best position.
Ensure the correct fixtures are used to attach the Techmount to the wall or
ceiling. The fixtures provided are M8x50 anchor bolts for attachment to
masonry. They are not suitable for timber studs and may not be suitable for
your application.
2. ATTACH SPIGOT TO WALL PLATE Thread cables through then attach.
4
TM-ST2_manual_en.doc