Maintenance And Cleaning - Jata electro PL43ON Instrucciones De Uso

INSTRUCTIONS OF USE
STEAM IRONING
• Set the temperature selector (6) to its maximum position (MAX) by turning it clockwise.
• Before filling the tank with water, set the adjustable steam knob (3) to the off position (0).
• To fill the tank, always do so with the iron unplugged from the mains. Open the filling lid (4) and
pour water into the tank using the cup provided.
• Do not go over the MAX indication of the tank (8) to avoid overflowing.
• Replace the lid.
• Plug the iron into the mains. The indicator (7) will light on.
• Once the pilot light (7) goes off, turn the steam knob (3) to any of its two positions: minimum
steam (I) or maximum steam (II).
SUPER STEAM
• The temperature selector (6) must always be set to its maximum position (MAX).
• Press and release the button (2). Repeat this operation at intervals between each time you press
the button.
• If you wish to obtain a greater super-steam set the steam control knob (3) to the off (0) position.
SPRAY IRONING
• To obtain a spray, the temperature selector (6) position is unimportant.
• Press the spray button (1). In case no water should come out, press the button again.
DRY IRONING
• If there is water in the tank, set the adjustable steam knob (3) to the off position (0).
• Plug the iron into the mains and place the selector (6) in the desired temperature for each fabric:
FIBRAS SINTÉTICAS : SINTHETIC FIBRES: Low temperature (•)
SEDA – LANA : SILK – WOOL: Medium temperature (••)
ALGODÓN – LINO : COTTON – LINEN: High temperature (•••)
AUTO-CLEANING SYSTEM
• Set the adjustable steam knob (3) to the off position (0).
• Pour water into the tank.
• Set the temperature selector (6) to MAX position and plug the iron to the mains.
• As soon as the indicator light (7) is off, place the iron in a horizontal position on a plate or suitable
container in the sink and remain pressed the auto-cleaning (8) button. The steam and drops of
water will begin to flow from the orifices in the base of the iron draining the dirt and particles.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning the appliance ensure the appliance is unplugged from the mains.
• The sole plate can be cleaned with a cloth soaked with vinegar. This whole operation is more
easily carried out when the sole plate is warm.
• The exterior parts of the iron may be cleaned with a slightly dampened cloth.
• Do not use abrasive or chemical products, metallic scourers, which may deteriorate the surfaces
of the appliance.
• To store the iron, ensure there is no water left in the tank, set the steam control to the off position
(0) and always store in a vertical position.
11