WatchGuard Technologies Firebox M200 Guia De Inicio Rapido página 5

Reset the Firebox to Factory-Default Settings
If you ever need to, you can restore your Firebox to its factory-default settings. For example,
if you do not know your administrator account passphrase or you want to start over with
RapidDeploy QuickStart, you can reset your device.
For more information, see the Hardware Guide for your Firebox, available at:
www.watchguard.com/help/documentation/hardware.asp
Install Your Firebox in a Network Rack
1. Locate the two rack ears and eight mounting screws included with your Firebox.
To attach each rack ear to the Firebox, use two large and two small screws.
2. Align the four holes in a rack ear with the four holes on one side of the Firebox.
Use large screws here
3. Use two of the smaller screws to connect the front of the rack ear to the Firebox.
4. Use two of the larger screws to connect the back of the rack ear to the Firebox.
5. Repeat these steps to connect a rack ear to the other side of the Firebox.
6. You can use rack screws and a washer (not included) to attach the rack ears to the rack.
8
激活设备
1. 转到 www.watchguard.com/activate
2. 登录到您的 WatchGuard 帐户，或者创建一个新帐户 * 。
3. 输入设备的序列号。
4. 在激活期间，选择安装方法：
5. 请根据您的实际安装方法选择本手册中对应的安装说明。
Use small screws here
* 如果创建新帐户，请在完成帐户创建过程之后返回到 www.watchguard.com/activate 。
• 快速部署 – 自动下载快速部署配置文件并将其应用到您的设备，其中预配置了
WatchGuard 推荐的安全设置。
• 常规激活 – 使用网页安装向导为您的设备创建基本配置。
9