Uline H-1662 Manual Del Usuario página 2

3. Remove the two keys from the back of the dispenser.
Insert key into the lock on the front access panel
and turn to unlock. Pull the lower part of the front
access panel approximately 2" towards you and lift
up to release and separate the front access panel
from the body of the dispenser. (See Figure 3)
Figure 3
4. The dispenser has two pre-drilled holes through the
back wall. Mount back wall of dispenser to steel
post using the H-2897 hardware kit. (See Figure 4)
Figure 4
5. Fill dispenser with two boxed rolls (S-15585 dog waste
sample bags). Place the two boxes on top of each
other on the shelf of the dispenser with the opening
of the boxes facing the front. Reinstall the front access
panel and lock with the key. (See Figure 5)
Figure 5
Boxes
PAGE 2 OF 6
ASSEMBLY CONTINUED
6. Reach through the two diamond-shaped openings
7.
Openings
1-800-295-5510
uline.com
and find the edges of the bags. Pull until the bags exit
the dispenser. (See Figure 6)
Figure 6
Mount optional sign to the top of the post using
H-1662-HDWR hardware kit. (See Figure 7)
Figure 7
0621 IH-2897