Basic Operation; Music Search - Teac CD-P1440 Manual Del Usuario

Basic Operation

1. Press the POWER switch.
The indicator on the display blinks, and then lights.
2. Press the OPEN/CLOSE button ( ø ) .
The disc tray will slide out.
Place the disc gently on the
tray with its label side facing
upward. The disc is set within
the disc guides at the center of
the tray.
3. Press the OPEN/CLOSE button ( ø ) again.
The disc tray will close.
4. Press the PLAY button ( Á ) .
Disc playback starts from the first track, and Á(play)
indicator will light.
... During playback, the number of the currently played track
blinks on the music calendar.
... When tracks have been played, their numbers will disappear
from the Music Calendar display.
Even if the disc tray is open...
When the play button(Á)is pressed, the disc tray will close and
playback starts from the first track.
Direct access play:
By pressing the numeric buttons corresponding to the required
track, the player starts from the specified track directly, without
pressing the play button.
Example 1:
To play the 5th track: Press
Example 2:
To play the 2lst track: Press
To stop playback:
Press the STOP button ( ª ) to stop playback.
To unload the disc:
Press the OPEN/CLOSE button ( ø ) ; playback stops and the disc
tray will slide out. All functions are reset to their initial settings.
To temporarily suspend playback (pause mode):
Press the PAUSE button ( π ) . Playback stops at the current
position and π indicator blinks. To resume playback from the
same position, press the PLAY ( Á ) or PAUSE ( π ) button.
For 8 cm (3-inch)
CD Singles
For 12 cm (5-inch)
Compact Discs
.
twice and .

Music Search

Music Search using 10-key buttons
Press the 10-Key buttons on the unit or the remote control
corresponding to the required track. The player starts to play
from the specified track directly.
Music Search using MUSIC SKIP buttons ( Â/¯ )
The beginning of any track can be easily located by using the
MUSIC SKIP buttons ( Â / ¯ ) during playback. This
operation is indicated clearly in the TRACK display.
... This operation is possible even in the program playback
mode. However, only programmed tracks will be detected.
To skip to the next track
Press the ¯ button.
The player will skip ahead to the next track each time the ¯
button is pressed. The player can be advanced to the last track
in this way, but once the beginning of the last track is reached,
the player will not advance even if the ¯ button is pressed.
To skip back to the previous track
Press the  button.
The player will skip back one track each time the  button is
pressed. If this button is pressed in the middle of a track, the
player will skip back to the beginning of the current track. To
make it skip back to the previous track, the button must be
pressed twice. In this way, the player can be returned to the
beginning of the first track of the disc.
Music Search using SEARCH buttons ( Ô/ )
During playback, hold down the  button to move the
playing position quickly in the forward direction, and hold down
the Ô button to move quickly in the reverse direction. When
the desired position is reached, release the button to reenter the
previous mode.
9