Descargar Imprimir esta página

Marineland MARINE PRO Serie Guia De Inicio Rapido

Publicidad

Enlaces rápidos

MARINE PRO SERIES
IN - SUMP
PROTEIN
SKIMMER
MODELS:
For Optimum Skimmer Performance:
Clean and empty
skimmed scum
from Collection
Clean Venturi Muffler
Cup as needed.
System with cleaning
tool (included) or with
a jet of water monthly.
IMPORTANT SAFEGUARDS
WARNING: To guard against injury, basic safety precautions should be observed, including the following.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
DANGER: To avoid possible electric shock, special care should be taken in the use of aquarium equipment. For each of
the following situations, do not attempt repairs yourself. Return the appliance to an authorized service facility for
service or discard the appliance.
1. A. If the appliance shows any sign of abnormal water leakage, immediately unplug from the power source.
B. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not
intended to be wet.
C. Do not operate any appliance if it has a damaged cord or plug, or if it
is malfunctioning or if it is dropped or damaged in any manner.
D. To avoid the possibility of the appliance plug or receptacle getting wet,
position aquarium stand and tank to one side of a wall mounted receptacle
to prevent water from dripping onto the receptacle or plug. A "drip loop",
shown in the figure at right, should be arranged by the user for each cord
connecting an aquarium appliance to a receptacle. The"drip loop" is that
part of the cord below the level of the receptacle or the connector, if an
extension cord is used, to prevent water from traveling along the cord and
coming in contact with the receptacle. If the plug or receptacle does get
wet, DON'T unplug the cord. Disconnect the fuse or circuit breaker that
supplies power to the appliance. Then unplug and examine for presence
of water in the receptacle.
2.
Close supervision is necessary when any appliance is used by or near children.
3.
To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, etc.
4.
Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before
cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.
5.
Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the
appliance manufacturer may cause an unsafe condition.
6.
Do not install or store the appliance where it will be exposed to the weather or to temperatures
below freezing.
7.
Make sure an appliance mounted on a tank is securely installed before operating it.
8.
Read and observe all the important notices on the appliance.
9.
If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or
watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be
tripped over or pulled.
SAVE THESE INSTRUCTIONS
100 and 300
Remove pump and clean
Venturi Intake & Needle
Impeller monthly.
Operating Water Levels
Models
AQUARIUM
APPLIANCE
POWER
CORD
DRIP
LOOP
Troubleshooting Guidelines
SYMPTOM
• Check skimmer for obstruction.
If skimmer stops working...
• Make sure water level is not too low. Intake should be below
water level.
If no bubbles are forming in
• Check for obstructions in venturi muffler system. Remove
skimmer body...
blockages with jet of water or use cleaning tool provided.
• Check pump connections and impeller.
• Check for kink in airline tubing. Unkink the tubing.
I I M M P P O O R R T T A A N N T T : :
Always unplug your
Protein Skimmer when inspecting or
disassembling for any reason.
LIMITED WARRANTY: Within three years from the date of original purchase, Marineland Aquarium
Products will repair or replace, at its option, any Protein Skimmer which is deemed defective
in workmanship or materials. Please return the unit, together with proof of date of purchase:
Call (800) 322-1266 for return authorization and shipping address.
Damage or injuries resulting from negligence or misuse are not covered by this warranty.
Incidental or consequential damages are specifically excluded.* This warranty gives you specific
legal rights. You may also have other rights which vary from state to state.
*Because some states do not allow the exclusion of incidental or consequential damages, this exclusion may not apply to you.
C C u u s s t t o o m m e e r r S S e e r r v v i i c c e e : :
(800) 322-1266
w w w w w w . . m m a a r r i i n n e e l l a a n n d d . . c c o o m m
Parts Diagram & Identification
1
2
3
Replacement Parts List
KEY
ITEM DESCRIPTION
1
Lid
2
Collection Cup
3
O-Ring
4
Venturi Intake
5
Locknut
6
Venturi Adapter w/ O-Ring
7
Needle Wheel Impeller
8
Adapter
9
Venturi Muffler Cleaner
Questions or Missing Parts:
Call Customer Service at
(800) 322-1266
(M-F 7:30 am - 5:30 pm, Eastern Time)
COMMENTS/SOLUTION
8
7
6
5
4
MODEL NUMBERS
100
300
4506
4515
4507
4516
4508
4517
4509
4518
4510
4519
4511
4520
4512
4521
4513
4522
4514
4523
02/08 AQ12117
9

Publicidad

loading

Resumen de contenidos para Marineland MARINE PRO Serie

  • Página 1 Protein Skimmer when inspecting or disassembling for any reason. LIMITED WARRANTY: Within three years from the date of original purchase, Marineland Aquarium Products will repair or replace, at its option, any Protein Skimmer which is deemed defective in workmanship or materials. Please return the unit, together with proof of date of purchase: Call (800) 322-1266 for return authorization and shipping address.
  • Página 2 • Verifique las conexiones de la bomba y el propulsor. • Verifique que no haya estrangulamientos en los tubos de aire. GARANTÍA LIMITADA: En los tres años siguientes a la fecha de compra, Marineland Aquarium Elimine las obstrucciones en los tubos.

Este manual también es adecuado para:

100300