SPIT AGP 125AV Instrucciones Del Manual De Usuario Y De Mantenimiento página 15

Mounting the dust guard
Never use the machine without first having attached the safety-guard.
Unplug the machine (1)
Place the tool on its back, with the spindle facing upwards (2)
Open the safety guard clamping lever and place the dust guard in the correct position
and close the spring clip (3)
Mounting the grinding discs
Pay attention to the dimensions of the grinding discs. The mounting hole diameter must
fit the mounting flange without play. Do not use reducers or adaptors.
When using a diamond cutting disc, take care that the direction of rotation arrow on
the disc and the direction of rotation of the machine (direction of rotation arrow on
the machine head) agree.
Unplug the machine (1)
Place the under flange (2)
Place the diamond disc (3)
Place the upper flange and tighten it with the double pin wrench (4)
Removal is the opposite of assembly.
1
AGP125AV_part1.indd 11
1
2
2
3
3
4
27/02/09 16:02
GB
11