THIEYE i60+ Guia De Inicio Rapido página 10

◇ When in Time-Lapse Photo mode, press the Shutter / Select Button,
the camera initiates countdown and the camera beeps multiple times
each time a photo is captured.
◇ To stop capturing, press the Shutter / Select Button.
Camera Setting
1. Car Mode: Open / Close
Default setting is close.
With the camera off and automotive charge connecting, when the car is
started, the camera will turn on and record automatically. When the car
is off, the video will be saved and the camera will turn off automatically.
2. 180° Turnover: Open / Close
Default setting is close.
When you use the i60+ as a driving recorder in your car, suggest you
turn this function on.
3. Exposure: -3 / -2 / -1 / 0 / 1 / 2 / 3
Default setting is 0.
By default, your camera uses the entire image to determine the
appropriate exposure level. However, Exposure lets you select an area
that you want the camera to prioritize when determining exposure. This
setting is particularly useful in shots where an important region might
otherwise be over- or underexposed. When you change this setting, the
display immediately shows you the effect on your image. If you change
modes, the camera returns to using the entire scene to determine the
correct level of exposure.
EN 16
4. White Balance: Auto / Sunny / Cloudy / Incandescent Light /
Fluorescent Light
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and
photos to optimize for cool or warm lighting conditions. When you
change this setting, the display immediately shows you the effect on
your image.
5. Wi-Fi: Open / Close
Default setting is close.
6. Power Frequency: Auto / 50Hz / 60Hz
Default setting is Auto.
7. LED Indicator Light: Open / Close
Default setting is open.
This setting determines whether to activate the camera status lights
(blue).
Note: If you close the LED Indicator Light, the blue indicator and the
WiFi indicator won't on when recording.
8. Display Off: 10s / 20s / 30s / Close
Default setting is 30s.
Turns off the display after a period of inactivity to save battery life. To
turn on the display again, press any button on the camera.
EN 17