Uline RUBBERMAIR H-2475 Instrucciones De Montaje página 3

Figure 5
Figure 6
Figure 7
Figure 8
PAGE 3 OF 9
ASSEMBLY CONTINUED
5. Attach drawer slides to bottom of top shelf using six
large screws. (See Figure 5)
6. Slide drawer front onto the front of the drawer.
(See Figure 6) Secure on either side using four large
screws. Secure through the center using one small
screw and one insert nut.
7. Place drawer into drawer slides by aligning drawer
cut outs with slots in the drawer slides. (See Figure 7)
8. Slide the lock through the hole on the right side of
the drawer front until lock front is flush with drawer
front. Slide one hex locknut and one barlatch over
the end of the lock. Secure end of lock with one trim
screw. (See Figure 8)
1-800-295-5510
uline.com
0321 IH-2475