Energizer PPS240W01 Manual Del Usuario página 65

product is fully charged, please unplug the AC wall charger in time.
B. This machine would start beeping and then shut down when being connected non-original power adapter to
ensure its safety. Usually, it takes about 4 hours to fully charge the machine using the original power adapter.
4. Charge Through Your Car
A. Plug the original car charger into the cigarette lighter socket of your 12V car, and then plug into the AC
input port of the machine.
B. The original car charger features 10A protector tube to protect your car.
C. You will know the machine is being charged when the battery indicators blink.
Notes:
To avoid car battery power loss, you should charge this product through your car cigarette lighter only when
your car engine is started.This function is for 12V car ONLY.
Protection mode(DC input)
A. Over-voltage protection : If you use non-original car charger to charge the machine, it will start beeping and
intelligently shut down to protect itself.
B. Under-voltage protection：The power generator can't be charged if the voltage of your car is too low.
Using Your Product
1. Power Button
A. Long press the power button for 2 secs to turn the machine on. At the same time, the DC and USB
function is turned on.
B. Press this button again to turn on AC function(at the same time, the AC icon is displayed on the screen).
EN-12