Fitting Instructions - Walter WaluWinch Instrucciones De Montaje

Using the screws and plugs provided, fix the stud to the ground.
1
Position: in the centre of the pool width, on the tiling, on the winding side,
about 1 m from the edge of the pool or steps.
Axis of pool
Depending on the condition of the pool deck, a second stud (supplied) may be
2
necessary (distance between the two : 200 mm, see sketch).
Drill a screw hole diameter 8 mm x 60 mm deep.
1 st hole

Fitting instructions

INSTALLATION AND UNWINDING
Axis of pool
200 mm
Distance between
1 and 1.2m
2 nd hole