ENGLISH
Connecting Devices using 3.5 mm
(1/8-inch) mini jack input
You can connect and listen to any music player that has
a standard 3.5 mm headphone port using a mini to
mini stereo cable (not included).
To connect, plug one end of the cable into the 3.5 mm headphone output of your
player and the other end into the 3.5 mm input on the back of Beatbox.
ImPORTANT: The iPod/iPhone dock will override and disable the 3.5 mm
mini jack input when an iPod or iPhone is docked.
Be sure to remove your iPod/iPhone from the dock before
using the 3.5 mm input.
Listen
Be sure a music player is securely connected, as described
in the previous sections.
Turn on Beatbox by pushing the power button on the left side
of top surface of Beatbox or with the remote control.
Start your player.
11
All manuals and user guides at all-guides.com
™
ENGLISH
Volume
Volume can be controlled with the volume control on the right
side of the top surface of Beatbox or with the remote control.
Using Remote Control to Control Beatbox
Make sure the CR2025 battery used by the remote is installed correctly.
If it is old, replace it.
Power on and off: Push
and release.
Volume: Push
and hold to increase volume.
Release when desired volume is reached.
Push
and hold to decrease volume.
Release when desired volume is reached.
mute: Push
and release.
To resume sound, push again.
™
12