Melchioni Family TWIN SPIN Manual Del Usuario página 11

[ B ] HOW TO ASSEMBLE THE MULTI-FOOD PROCESSOR
( 1) For chopping or mixing ingredients other than milkshaking.
-Attach two Blade Sticks (D) onto two Blade Supports (G) in the Bowl (E) and
pour in the food to be chopped. (Figure 1)
-Attach the Lid (C) on top of the Bowl (E) then the Motor Unit (A) onto the Lid
collar(C). Plug the appliance in. Press down on the Motor unit (A) and at the
same time press the High/Low Speed Switch to operate. Press lightly on the
button to obtain Low speed and firmly for High speed.
- There is a protection switch installed in the Motor Unit (A). If the Motor Unit
(A) is not properly fitted to the Lid collar (C), the protection lug will not touch
the protection switch and the Motor Unit (A) will not operate.
-After use, unplug the appliance and wait until the Blades (F) stops
completely. Remove the Motor Unit (A), the Lid (B) and the Blades (F).
( 2 ) For milkshaking.
-Attaching the Milk Shaker Attachments (H) by slip it onto the Blade Sticks (D).
Please see figure2.
- Attach two Blade Sticks (D) with the Milk Shaker Attachments (H) onto two
Blade Supports (G) in the Bowl (E) and pour in the ingredients to be mixed.
- Attach the Lid (B) on top of the Bowl (E) then the Motor unit (A) onto the Lid
Collar(C). Plug the appliance in. Press down on the Motor unit (A) and at the
same time press the High/Low Speed Switch to operate. Press lightly on the
button to obtain Low speed and firmly for High speed.
-Always wait the Blade (F) completely stops when you need to remove the
Milk Shaker Attachment (H) after milkshaking. To remove it, simply taking off
the Motor unit (A) and the Lid (B), put your second and middle fingers under
the collar of the Milk Shaker Attachment (H) and your thumb on the end of the
spindle. Finally pull the collar up while pressing gently on the spindle with
your thumb (Figure 3). The Milk Shaker Attachment (H) then will come off.
[ C ] HOW TO CLEAR YOUR MULTI-FOOD PROCESSOR
IMPORTANT: Never put the motor unit under a tap or in a dishwasher but
clean it with a damp sponge.
IMPORTANT: Handle the blades carefully when cleaning. They are extremely
sharp.
( 1 ) Cleaning the processor bowl and accessories
Unplug the appliance .
Remove the motor unit (A) and Bowl Lid (B).
Remove the blade sticks (D) and the Milk Shaker Attachments (H) form the
processor bowl (E).
Rinse the bowl lid (B), processor bowl (E), and the accessories under running
water. Dry the accessories naturally.
Wipe clean the motor unit (A) with a damp cloth; never immerse in water.