Troubleshooting - Hyundai HT801 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing the Battery
The thermometer is supplied with one lithium cell (CR2032). A low battery symbol will appear on the LCD
when the battery needs to be replaced. Power off the thermometer prior to replacing the batteries.
1. Open the battery cover: Insert a pointed object, such as a pen, into battery cover pick hole. At the
same time, use thumb to push battery cover out.
2. Hold the device and flip the battery out with a small screwdriver
3. Insert the new battery under the metal hook on the left side and press the right side of the battery
down until you hear a click. * The positive (+) side up and the negative (-) side pointed down.
4. Replace the battery cover
The thermometer may be damaged when changing the battery while powered on, turn the thermometer off prior to replacing
batteries. Properly dispose of used batteries and keep out of reach of children.

Troubleshooting

Error
Message
Device stabilization in process.
Battery is low and no more
measurements are possible.
Measurement taken before
device stabilization.
The device showing a rapid
ambient temperature change.
The ambient temperature is not
within the range of: 50
o
(10
C and 40
Error 5~9, the system is not
functioning properly.
Temperature taken is higher than
o
108.0
F (42.2
Temperature taken is lower than
o
93.2
F (34
Device can not be powered on to
ready stage.
All manuals and user guides at all-guides.com
Problem
Wait until
Replace the battery.
Wait until
Allow the thermometer to rest in a
room for at least 30 minutes at
room temperature:
50
Allow the thermometer to rest in a
room at least 30 minutes at room
o
o
F ~104
F
temperature: 50
o
C).
and 40
Remove the battery, wait for 1
minute and reinsert. If the message
reappears, contact the retailer for
service.
Check the integrity of the probe
cover and take a new temperature
o
C).
measurement.
Make sure the probe cover is clean
and take a new temperature
o
C).
measurement.
Replace with a new battery.
Solution
stops flashing.
stops flashing.
o
o
o
F ~104
F (10
C and 40
o
o
F ~104
F (10
o
C).
o
C).
o
C

Publicidad

Tabla de contenido
loading

Tabla de contenido