Oxygenics CareSpa Instrucciones Para La Instalación Fácil

C S
ARE PA
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise
direction, screw
grooved end of hose
to the taped portion of
the shower arm. Hand
tighten only.
USING THE
COMFORT
CONTROL
Located on the back
of the shower head, the comfort control
lever eliminates sudden blasts of water.
Note: The comfort control is not a shut off
valve. When turned to the lowest position,
the shower head continues to flow. This
is a normal safety feature. Unit may be
in lowest flow position during shipping.
Check the position of comfort control
upon installation.
STEP 2
Remove any remnants
of old plumber's tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach end of hose to
handheld holder and
hand tighten.
EASY TWIST
SPRAY SELECTION
Enjoying multiple
spray patterns during
your shower has never
been easier. With the
CareSpa's easy twist
design, simply rotate
the easy spray selector
for a quick spray change.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach double stick
tape provided to back
of holder and press
firmly to clean, dry
shower wall. Place your
new handheld shower
head into holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves rated at
1.50 GPM (5.68 L/min) or less.