Hummer H-120 ARGB Manual Del Usuario página 7

Intel LGA1200/115X
1. Push the screws on the backplate to the inside and then put the backplate from the back of the
motherboard and insert the long screws through the motherboard.
2. Put the LGA120/115X standoff onto the long screws of the backplate.
3. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
4. Put the pump onto the CPU. Secure the block using the tightening nuts.
AMD mounting
Align the arrows on the bracket and the pump base, and then turn the bracket clockwise to secure
it to the pump base.
AMD AM4
1. Remove the original retention frame from the motherboard, but keep the backplate.
2. Thread the AM4 standoffs onto the backplate. (Put the plastic insulator if you have between
motherboard and the metal standoffs).
3. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
4. Put the pump onto the CPU. Secure the block using the tightening nuts.