EHEIM 6064 230V AC Instrucciones De Uso página 13

Keep the C0
short as possible as overpressure builds up with a closed solenoid valve.
On opening the solenoid valve the briefly increased volume of C0
aquarium is reduced.
• Connect the mains plug of the solenoid valve with the timer switch g or the EHEIM
powerLED+ h plug connection with the Y-distributor j As soon as the solenoid
valve is supplied with power, it opens and the C0
Only increase the C0
Apply the EHEIM C0
amount of C0
7. Special Instructions
• In order to avoid noise through resonance transmission, do not install the C0
noid valve on thin underlays (for example, wood or plastic panels).
• Only operate the C0
been designed especially for the supply of C0
• In order to prevent corrosion, protect the C0
valve. Non-return air valves for commercially available air diaphragm pumps are not
suitable as, due to the C0
8. Technical data
Type
Operating voltage
Power consumption
Max. operating pressure
Hose - Ø
Protection class
9. Accessories and Spare Parts
7206228 CO - SAFE safety hose (3 m)
2
6063090 CO - long-term test
2
hose between the pressure reducer and the solenoid valve as
2
supply gradually and spread over several days.
2
long-term test for the determination of the correct
2
.
2
solenoid valve together with a C0
2
, they begin to leak after a short operating period.
2
EHEIM C0
6064 (230V AC)
230 V / 50 Hz
1,6 W
supply begins.
2
pressure reducer which has
2
to aquaria.
2
solenoid valve using a C0
2
Solenoid Valve
2
6 bar
4/6 mm
IP65
7428358 CO
4200050 Y-distributor for the powerLED+
13
2
non-return
2
6064 (24V DC)
24 V DC
2 W
- check valve
2
in the
sole-
2