7| IMPORTANT INFORMATION
BEFORE PREPARING DRINKS
7.1| PREPARING THE APPLIANCE
1| Remove and fill the water tank
A3 – A6).
2| Replace the water tank
3| Remove the lid of the coffee bean container
and add coffee beans (max. 250 g) (figu e
1
A12 – A13).
4| Replace the lid of the coffee bean container
(figu e A14).
1
CAUTION
Do not fill the water tank
water, milk or any other liquid.
CAUTION
Never put ground coffee in the cof-
fee container. It is recommended that
you do not use oily, caramelized or flavo ed cof-
fee beans for this appliance. These kinds of
beans may damage the appliance. Check that
the coffee beans do not contain any foreign
particles such as grit, as any damage caused by
the presence of foreign particles will invalidate
the guarantee. Do not put water into the coffee
bean container.
(figu e
16
(figu e A7).
16
with hot
16
7.2| PREPARING THE GRINDER
Depending on the drinks chosen and the
strength of coffee selected, your machine will
automatically adjust the quantity of ground
coffee.
You can also set the strength of your cof-
fee by adjusting how finely the coffee beans
are ground. In general, the finer the coffee is
ground, the stronger and creamier the coffee
will be.
It may also vary according to the type of coffee
used. We recommend a fine setting for esp es-
sos and a coarser setting for coffees.
Adjust the fineness of grinding by moving the
slider of the coffee grounds fineness adjuster
which is located on the topside of the appliance
(figu e A14).
CAUTION
On new product the grinder position is
a factory setting and should not be
changed during 30 recipes to let the grinder set
in its optimal configu ation. However if the cof-
fee dispenses too slowly you can move the slider
1 notch towards the right direction for more
coarseness.
NOTE
This setting should be applied during
grinding notch by notch. It is advised to
move 1 notch at a time, you will notice a pro-
nounced difference in taste after 3 recipes. If
you set the grinder towards "fine" mo e than 1
notch at a time an alert screen might ask you to
reset it coarser.
Setting the fineness of grinding is useful when
you change the type of coffee or if you want
to make coffee that is more or less strong.
However, it is not advised to use this setting
systematically.
39
2