Mounting Position - Herschel MANHATTAN 3000 Instrucciones De Instalación Y Funcionamiento

heater. Colour coding used in the supplied mains cable: BROWN wire is to be connected to LIVE ('L'), the
BLUE wire to NEUTRAL ('N') and the GREEN/YELLOW wire to EARTH ('E').

MOUNTING POSITION:

The Herschel MANHATTAN is a middle wave infrared heater characterised by a strong beam of heat suited
for use in colder areas or areas that may be subject to light winds, whilst still maintaining heating
effectiveness. When used outdoors or other areas with air movement/wind, the directional Infrared spread
may reduce by 1/3 to 1/2 from published figures.
Ensure distances are maintained from the nearest wall or ceiling according to your installation, as shown:
Diagram 1: Wall Mounted, horizontal or vertical
MANHATTAN may be wall mounted horizontally or vertically and can be adjusted to project straight
outwards or at a 45° angle. The minimum installation height of the MANHATTAN above the floor is 1.8m
(71") when wall mounted.
Diagram 2 – Ceiling Mounted
The minimum installation height of the MANHATTAN above the
floor is 2.4m (95") when ceiling mounted. Consideration should
be given to any temporary or occasional structures such as stages
or platforms and adjusted accordingly. Keep the cable and other
electrical connections outside the heater footprint.
For all installations, the MANHATTAN must be located in a
position to allow proper and efficient use but one that ensures
hot parts are not touched accidentally.
ENGLISH