Operating The Cameras - JVC VR-N900U Guía De Inicio

Basic Operation

Operating the Cameras

You can operate the PTZ (pan-tilt-zoom) cameras using the
numeric keys 1 to 9, [ZOOM OUT/CANCEL] and [ZOOM IN/
ENTER] buttons.
Pan/Tilt
1
Press the [PTZ/PRESET] button to select PTZ
mode.
The mode switches between [PTZ] mode (indicator lights
up) and [PRESET] mode (indicator blinks) each time the
button is pressed.
2
Press the numeric keys 1 to 9.
The camera pans or tilts in the direction of the arrow on the
selected button. Press the numeric key 5 to return to the
home position.
Zoom In/Zoom Out
1
Press the [PTZ/PRESET] button to select PTZ
mode.
The mode switches between [PTZ] mode (indicator lights
up) and [PRESET] mode (indicator blinks) each time the
button is pressed.
2
Press the [ZOOM IN/ENTER] button or the [ZOOM
OUT/CANCEL] button.
E-24
Using Preset Positions
1
Press the [PTZ/PRESET] button to select
preset mode.
The mode switches between [PTZ] mode (indicator lights
up) and [PRESET] mode (indicator blinks) each time the
button is pressed.
2
Enter the preset number with the numeric keys
1 to 9.
The camera will move to the preset position.
Note
• You can enter the preset number from 10 to 19 by
pressing 0 first, then keys 0 to 9.
CAUTION
• To use the preset function, you must have defined the
preset positions first.
[REC CONTROL] button
[LIVE/BROWSE] button
[SELECT] button
Keypad
[PTZ/PRESET]
[FUNCTION]
button
button
[ZOOM OUT/CANCEL]
button
[ZOOM IN/ENTER] button
[SKIP]
button
[ALARM CLEAR]
button