System Requirements; Safety Precautions - Teac HD-15PUK Manual

Thank you for purchasing the TEAC External USB 2.0/1.1 Hard Drive kit. The HD-15PUK is one of the most compact high performance USB
hard drives on the market today.
• Package Contents: external USB Hard Drive, CD-ROM containing driver software, USB 2.0/1.1 interface cable, this user's manual
Capacity The HD-15PUK is available with several different capacities.
•
• Interface USB 2.0/1.1 (Universal Serial Bus)
• Spindle Speed 4200rpm to 5400rpm (model dependent)
Dimensions 77,5 mm (W) x 15,5 mm (H) x 135 mm (D)
•
• Weight appr. 500g
• Power Requirement DC 5V/1A
Installation Horizontal
•
• Temperature 5°C to 40°C (operating)
• Safety Standards CE, UL, CSA, TÜV

System Requirements

• An available USB port (USB version 1.1 or 2.0)
Windows: IBM PC-compatible Pentium III 600MHz computer, Windows 98SE/Me/2000/XP (full installation, no upgrades. Windows 95
•
and NT 4.0 are not supported), 64MB of RAM, CD-ROM drive (to install driver software for Windows 98SE only) or Internet access (to
download driver software)
Macintosh: Apple Macintosh G3 (or higher processor) computer, Mac OS 8.6 / 9.2 / 10X or later (earlier versions are not supported,
•
under OS 8.6 the USB support has to be at least version 1.41), 32MB RAM
Installation
- Turn on the power to your computer.
- Connect the wider plug of the included USB 2.0 cable to a USB port on your computer.
- Connect the other end of the USB 2.0 cable to the USB 2.0 port Á on the rear panel of the USB hard drive.
- Confirm that the Power LED À on the USB hard drive lights up.
Normal operation LED lights green
During Data Access LED flashes red
Ensure under any circumstances that the plug of the optional power supply (5V DC, 1A min.) achieves the correct polarity. Minus has to be
connected to the inner contact while plus has to be applied over the outer part of the plug (Ã Ü Â).
Note: With wrong polarity severe damage may occur to the TEAC USB hard drive.
Driver
Windows: There is no need to install drivers for your TEAC HD-15PUK (with the exception of Windows98SE). As a plug-and-play device it
is recognized automatically.
When connecting the first time to a Windows98SE system the Add New Hardware Wizard comes up and requests you to insert the CD
shipped with the package. Please follow the instructions on the screen.
Windows displays an icon for the USB hard drive in the My Computer panel.
Macintosh: The Macintosh automatically detects the USB hard drive and displays the icon for the USB hard drive on your Macintosh
desktop.
It may take a couple of minutes to mount the USB hard drive on your desktop the first time you connect it to the system. Do not disconnect
the USB hard drive, or cut the power to the USB hard drive, during this process.
Note:
Depending on the supplier the hard disk is preformated as NTFS or FAT32.
Windows: Because operating systems like Windows 98 and ME are not able to work with NTFS the hard disk has to be formated
with FAT32. To do this you may use the native windows tool "fdisk" or third party software like Partition Magic.
A detailed description you will find on our website www.teac.de/support.
Macintosh: TEAC recommends that you re-initialize the USB hard drive using the Mac OS 10 X Disk Utility. Mac OS9.2 and older
does not support creating partitions on an external drive. To do that you would need to purchase additional software. Initializing is no
problem on all OS.
Disconnecting the USB Hard Drive from a Computer
Windows: Left-click on the Hardware disconnecting icon
drive.The message that the USB storage device can be safely disconnected appears in a few seconds to allow you to remove the USB cable
connecting the drive and the computer. Click the OK button to pull out the USB cable.
Macintosh: Drag the icon for the USB hard drive to the Trash icon on the Macintosh desktop. You may now safely disconnect the USB hard
drive from your computer.

Safety Precautions

To prevent fire or shock, do not expose the unit to moisture or rain.
To prevent electrical shock, do not attempt to disassemble the hard drive. Refer servicing to authorized personnel.
All manuals and user guides at all-guides.com
ENGLISH
on the Taskbar at the lower right of the screen. Left-click on the applicable
– 4 –