Battery Replacement - Gioteck MX-1 Manual Del Usuario

set up
The MX-1 is designed for today's uncluttered micro lifestyle, and with a length of only 100mm and a depth of less than 10mm,
it takes pride of place in any modern day lounge. Set up is uncomplicated and takes a matter of seconds.
1 Remove the Battery Protection
Strip on your remote.
4 Insert a DVD or Blu-Ray™ disc.
04 | SETUP
All manuals and user guides at all-guides.com
2 Connect the USB IR Receiver 3 Turn on your PS3™.
to any USB port on the PS3™.
5 Ensure that you are within 4.5 metres and
have direct line of sight with the IR receiver.

battery replacement

Using your thumb tip, Use your fingernail
press and slide the or small flat head
battery door open. screwdriver, prise the
battery away as
indicated. Remove any
battery protection
film if first time use.
Insert a new battery Replace the
[CR2032] 3V. battery door.
BATTERY REPLACEMENT | 05