Publicidad
OPERATION
REMOTE ENGINE START (vehicles without Smart Entry System)
To start a non-Smart Entry vehicle remotely, press and release the LOCK button twice within
two seconds, then press and hold the LOCK button for three seconds.
STEP 1. Press and release the LOCK button twice within two seconds. The hazard lights
will flash each time.
STEP 2. Press and hold the LOCK button for three seconds. The hazard lights flash once
when pressed, then again after three seconds. The engine starts, and the hazard
lights flash for 20 seconds.
NOTE: Your vehicle may be equipped with either remote pictured here.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times
that the light flashes.
A) Press and
B) The hazard
release
lights flash
the LOCK
once.
button.
LOCK
FOLLOWED IMMEDIATELY BY:
THREE SECONDS
A) Press and
B) The hazard
hold the
lights flash
LOCK
once.
button for
three
seconds.
LOCK
LEXUS REMOTE ENGINE STARTER
TWO SECONDS
C) Press and re-
lease the
LOCK button
again.
C) After three
seconds,
the hazard
lights flash
again.
Page 5
D) The hazard
lights flash
again.
20 SECONDS
D) The engine
starts and the
hazard lights
flash for 20
seconds.
OPERACIÓN
ARRANCADO A
Para arrancar a dist
botón para ASEGUR
el botón para ASEG
PASO 1. Presione
dos segu
PASO 2. Presione
tres segu
nuevame
cia deste
SEG
NOTA: Su vehículo
dos aquí.
NOTA: Para vehícu
que las luces deste
Publicidad
