BaBylissPro BAB3021E Guia De Inicio Rapido página 4

ENGLISH
Please carefully read the safety
instructions before using the
appliance.
BAB3021E
Professional ceramic
coated heated rollers
Those BaByliss PRO® rollers are
ceramic coated to keep the heat
longer.
INSTRUCTIONS FOR USE
1. Place the appliance on a level,
heat-proof surface. Do not open
the lid.
2. Switch on the appliance. One roll-
er has a red 'ready dot'. When it
turns white (after only 5 minutes),
all the rollers are at the correct
temperature.
3. Comb your hair and take a sec-
tion the width of a roller. Hold
this at a right angle to your head
and pull the roller along to the
end of the hair like a comb.
4. Wind the end of the hair around
the roller, holding the hair taut
and keeping the roller at right
angles to the scalp to ensure
even curls.
5. Fix the roller with a butterfly
clamp, as close to the head as
possible.
6. Use the other rollers in the same
way- the smaller ones for tighter
curls and the larger for looser,
bouncy curls.
7. You can determine the 'bounce'
of the curls yourself- the shorter
the time the roller stays in the hair,
the looser the curl, the longer the
time the tighter the curl. The roll-
ers stay warm for approximately
15 minutes. If hair curls easily, it
only takes a few minutes; Thicker,
more difficult to curl hair can take
10 minutes or longer for the curl
to set.
8. Switch off when all rollers have
been used.
9. Carefully remove the rollers from
your hair and allow the curl to
spring back and cool for a few
minutes.
10. After your hair has cooled down,
comb or brush into the desired
shape.
Warning
• Do not open the lid until the roll-
ers are fully heated up and ready
for use.
• Take care to avoid contact be-
tween the hot rollers and the
face or neck
• When the rollers are heating up,
each heating post must have a
roller on it. Please do not touch
the hot metal parts of the appli-
ance during use.
Maintenance
• The rollers can be easily cleaned
by soaking them in warm soapy
water for a few moments. Rinse in
clear water, then shake briefly and
dry. Allow the rollers to dry for 1 to
2 hours before using again.
• Never submerge the appliance in
4