Intended Use; Technical Description - Dometic PERFECTPOWER Serie Instrucciones De Montaje

Intended use

4 Intended use
A
NOTICE!
This device is exclusively intended for vehicle use.
The inverters are used to convert a direct current of 12 V or 24 V into a 230 V
AC supply of 50 Hz.
• 12 V: PerfectPower PP152, PP402 and PP602
• 24 V: PerfectPower PP154, PP404 and PP604
5

Technical description

The PerfectPower inverter can be operated wherever there is a 12 Vg vehicle socket
(for PP152, PP402, PP602) and a 24 Vg vehicle socket (for PP154, PP404, PP604).
The device is additionally cooled with a load and temperature dependent fan.
The maximum constant output for the devices is as follows:
• For PP152 and PP154 inverters 150 W
• For PP402 and PP404 inverters 350 W
• For PP602 and PP604 inverters 550 W
Never connect devices that have a higher power requirement.
The inverter is equipped with protection against thermal and electrical overloading,
as well as excess and insufficient voltage. The inverter switches off:
• If its internal temperature is too high
• If the load exceed the values stated above
• If the input voltage is too high or too low
The inverter can be switched on and off using the switch directly on the device or
using an external switch.
I
NOTE
Note when connecting devices with an electrical drive (such as power
drills and refrigerators), that they often need more power than is stated
on the type plate.
10
PerfectPower
EN