Assembling The Trap - Biogents BG-GAT 2 Manual De Uso

Assembling the Trap

Attention:
When using the trap for the first time, the smell of the new plastic may have a repellent effect on the mosquitoes.
This is normal and will fade away in the first two weeks.
Bti
F4
32 EN
or
F1
F3
1. Fill the black bucket with water up to the overflow (about
2 liters / 0.5 gallon) [F1].
2. Add organic material to the water. (e.g., one leaf, some
blades of grass or dry hay, one or two pieces of rabbit
chow, or alfalfa pellets [F2]). This will act as an additional
attractant for the mosquitoes.
3. To avoid the development of larvae in the water, we
F2
recommend either
• to check the bucket once a week for larvae and, if
present, to empty, clean, and refill it [F3]
or alternatively
• to add the biological larvicide Bti ("mosquito dunks"
and similar products) [F4].
4. Put the barrier net over the open end of the translucent
chamber. Then tighten the top part of the barrier net by
pulling the cord of the bag tightly [F5].
F5
5. Place the translucent chamber into the black, water-filled
trap bucket [F6].
F6