König SEC-DVRPEN11 Manual De Uso página 3

OPERATION:
1. ON/OFF:
Hold the ON/OFF button until the red LED indicator stays lit.
2. PHOTO FUNCTION:
Turn on the camera until the red LED indicator stays lit. Press the ON/OFF button once to take a
picture. (It only takes one picture and the LED indicator does not flash).
3. VIDEO FUNCTION:
Turn on the camera until the red LED indicator stays lit. Press the ON/OFF button once to enter into
video mode. The red LED indicator will keep flashing, it means the camera is recording a video. Press
the ON/OFF button again, the camera will stop recording and the video file will be saved.
4. CONNECT TO A COMPUTER OR NOTEBOOK:
Open the pen to access the USB connection. Connect the pen to a computer or notebook with the
supplied USB cable. Open the folder to view the files. The photo and video files are stored in the folder:
_REC\100MEDIA. When the pen is exchanging data with the computer or notebook, the LED indicator
is flashing.
5. SET THE TIME/DATE/YEAR:
If you want to include the year, date and time with the photos and videos, please follow the instructions
below:
A) Connect the pen with the computer or notebook
B) Open the folder to view files (root directory)
C) Right click with mouse and select NEW in the pop up window
D) Select TEXT DOCUMENT and open the TEXT DOCUMENT (in the folder)
E) Enter as follows: yyyy.mm.dd <PRESS TAB BUTTON> hh.mm.ss
(e.g.: 2011.12.27
F) Click FILE (left top corner of TEXT DOCUMENT) and choose option SAVE.
G) The file is saved in the root directory and the photos and videos are now marked with year, date
and time.
6. CHARGE:
Open the pen to access the USB connection. Connect the pen to a computer or notebook with the
supplied USB cable. The LED indicator will slowly light up in red and green. When the LED indicator
blinks bright red, the battery is fully charged.
7. POWER SAVING MODE:
If the ON/OFF/OPERATION button is not pushed within 25 seconds, the camera will turn off to save
battery capacity.
8. GENERAL:
When there is no storage capacity left, the LED indicator will blink red and blue to indicate to change
the Micro SD card or copy the files to your hard disk drive of your computer or notebook. The pen will
save the last data and shut down automatically.
15:45:00)
3