FEATURES
DSP FEATURES
DEFAULT DISPLAY
The default display (right) is shown when you are
not making any adjustments. The top line shows the
output volume in dB. Rotate the MASTER knob to
adjust the level.
The signal level is shown as a horizontal bar graph.
'CLIP' appears in the box at the right-hand side
of the graph if the input signal level exceeds
the clipping level. Reduce the input level if this
happens.
USING THE MENU
Press the MASTER knob to access the DSP menu.
The scroll bar at the right-hand side of the display
shows the current position in the menu list.
The currently selected menu item is highlighted.
Rotate the MASTER knob to scroll through the
menu items. When the desired item is highlighted,
press the MASTER knob to select it. The parameter
value that you will be adjusting will be highlighted.
Rotate the MASTER knob to scroll through the
available values then press the MASTER knob again
to confirm. The highlight will then return to the
current menu item.
To exit from the menu, scroll up or down to 'EXIT'
and press the MASTER knob, or just wait a few
seconds and the display will change back to the
default screen automatically.
EXIT
SW-P15X
MODE:
MUSIC
LOCATION:
NORMAL
INPUT 1
INPUT 2
CAUTION
RISK OF ELECTRIC SHOCK
DISCONNECT INPUT POWER
BEFORE OPENING. Ta=40°C
WARNING: THIS APPLIANCE MUST BE EARTHED
INPUT POWER: 220-240VAC, 50-60Hz
FUSE: T3.15A, 250V
POWER CONSUMPTION: 1000W
KETTLESTRING LANE | YORK | YO30 4XF | UNITED KINGDOM
METALLVÄGEN 45A | 195 72 ROSERSBERG | STOCKHOLM | SVERIGE
LAHNSTRAßE 27 | 45478 MÜLHEIM AN DER RUHR | DEUTSCHLAND
WWW.GEAR4MUSIC.COM
5
MASTER
PUSH FOR MENU
OUTPUT 1
OUTPUT 2
LEVEL
LEVEL
LEVEL
IN1
IN1
IN2
IN2
IN1
IN2
EXIT
EXIT
MODE:
MUSIC
MODE:
MUSIC
EXIT
LOCATION:
NORMAL
LOCATION:
NORMAL
MODE:
MUSIC
LOCATION:
NORMAL
EXIT
EXIT
MODE:
MUSIC
MODE:
MUSIC
EXIT
LOCATION:
NORMAL
LOCATION:
NORMAL
MODE:
MUSIC
LOCATION:
NORMAL
00dB
00dB
00dB