Leifheit AirActive M Instrucciones De Servicio página 26

Use the steam extractor for:
Shirts
Trousers (with crease ironed in)
Pleated skirts
Jackets
Tablecloths
Use the blower function for:
Delicate fabrics
Silk blouses
Creases (pleats)
Rear sections
Frills
Jackets with inside linings
...at a glance
The Leifheit AirActive M Active Ironing Board
enables you to use your steam ironing station
efficiently. This results in time-savings and better
ironing results.
Always check the washing/ironing instructions
which are to be found on the labels of your
garments and linens, as well as the advice and
regulations in the instructions for use which came
with your steam station and iron.
Disposal
Should you need to dispose of your appliance, it should first be rendered
unusable (e.g. by cutting off the cord and the plug) and then disposed of in
accordance with current regulations.
Your local authority will be able to provide you with the necessary information.
Dispose of packaging appropriately.
26
Product features:
•
universal iron rest fi ts all current steam stations,
low-slung for ergonomic ironing
•
easy to use (one switch only
controls blower functions)
•
lightweight and therefore easy to
transport and quick to set up
•
suitable for both
left and right-handers
•
classic ironing board shape,
optimized for all uses
•
sturdy tubular steel frame for superb stability
You'll fi nd more
information about the latest in
steam-ironing accessories
on our website at:
www.leifheit.com
Please note the following:
The manufacturer's warranty period starts on the
date indicated on the sales receipt and expires after
2 years. This warranty does not affect your statutory
rights in respect of your supplier. Be sure to keep the
sales receipt safe, as this serves as proof of purchase.
For all warranty or service issues, contact the Leifheit
Customer Service on:
Warranty
(Can be reached daily Monday through Friday)
E-Mail: service-dampf@leifheit.com
The Leifheit customer service offers its services in your
mother tongue.
Dear Customer,
Our Leifheit products are subject to a strict final quality inspection procedure. In the unusual
event that you encounter problems when using the Active Ironing Board you have purchased, or
should you have grounds for complaint as a result of defects, please follow the procedure below:
1. Call the Leifheit Customer Service Hotline and describe the problems you have
encountered. Customer Service will make a remote diagnosis and discuss any further steps
that might be required.
2. If it is necessary to despatch the Active Ironing Board to Customer Service for inspection or
repair, please enclose the warranty card (Page 47), duly completed, and a copy of the sales
receipt with the return goods and arrange for the goods to be collected by parcel service and
obtain a receipt.
Manufacturer's warranty claims based on material and production faults are dealt with accor-
ding to the following warranty conditions:
1. Warranty is available for defects caused by material and production faults only. It excludes
defects caused through frequent use, e.g., scratches on the sole plate, and faulty power
connections and mains supply, which have been caused by improper use or external force.
2. The manufacturer reserves the right to replace or repair the defective parts before the
warranty expiry date free of charge. Further claims, in particular for damages, are
excluded.
3. The warranty period is not extended as a result of claims made on the warranty. This also
applies to parts which have been replaced or repaired.
4. Where an appliance has been repaired or fitted by unauthorised persons or service centres,
the warranty becomes invalidated.
5. Damage in transit is excluded from the warranty.
6. Any damage or defects present at the time of sale must be advised immediately on
unpacking the goods and no later than two days after the date of purchase.
If the appliance has been used for a purpose other than that for which it is intended or if it has
been operated incorrectly or in violation of the instructions during the manufacturer's warranty
period, no liability will be accepted for any damage caused and the manufacturer's warranty will
be invalidated. In the case of a warranty claim, the manufacturer reserves the right to decide
whether the appliance is to be repaired or whether you will receive a new appliance.
You can continue to use our Customer Service for your repair needs after the manufacturer's
warranty period has expired. (Please always phone our Customer Service to arrange any repairs
beforehand).
Our Hotline can also provide further ironing tips and advice and assist you with a remote diagno-
sis should you encounter any problems.
+49 (0) 1805 782754