Publicidad
CAMERA SET UP (ADD DEVICE)
1.
Ensure your mobile device is connected to your Wi-Fi network (2.4 GHz)–
1
the camera and mobile device must be connected to the same network
for setup.
2.
Once your account is activated, the Add Device screen will open.
2
Tap the + icon to add the camera.
Scan the QR Code on your camera and select Single Camera Setup.
3.
3
If your Network allows, the camera will connect over Wi-Fi directly.
Follow the on-screen instruction to complete the camera setup.
NOTE: If the camera does not connect, follow the Setup Using Ethernet
Cable steps.
For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT
Publicidad
