Indel Marine isotherm TB 32 Instrucciones Para El Uso página 11

isotherm tB 32
All manuals and user guides at all-guides.com
ENGLISH
USE
SWITchINg ON
To turn the refrigerator on, simply put the cable into the socket. If the power supply is cut off, the refrigerator
switch on automatically when the energy is on again.
SETTINg ThE INSIdE TEMPERATURE Of ThE TB 32A
The temperature of the TB32A refrigerator can be set by turning the thermostat knob.
Turn the knob clockwise to lower the inside temperature, turn it counterclockwise to raise it.
fIllINg fOOd
Do not put hot food into the refrigerator. Position the products so they do not strike against other products
or break while the vehicle is moving. When in use, make sure the cover is always properly closed and leave
it open as little as possible. When not in use, keep the lid open for ventilation.
dEfROSTINg
Defrosting is required when the frost layer gets thicker than 4 mm. To perform defrosting, turn the refri-
gerator off. Do not use sharp tools to remove the layer of frost and ice. Wait until everything has unfrozen
completely, dry the refrigerator and then turn it on again.
MAINTENANcE
Clean the inside of the refrigerator regularly, using sodium bicarbonate dissolved in lukewarm water.
Never use abrasive products, detergents or soap. After washing, rinse with clean water and dry carefully.
Do not leave the refrigerator shut off, warm inside, with food inside or lid closed.

ISOTHERM TB32A-00_14-03-2007