Publicidad
MIXER FRONT PANEL
1
2
CHANNEL 1
CHANNEL 4
8
1. BASS
Adjust this knob to increase or decrease the low
(bass) frequencies of the channel.
2. TREBLE
Adjust this knob to increase or decrease the high
(treble) frequencies of the channel.
3. LEVEL
Adjust this knob to increase or decrease the
channel volume.
4. DIGITAL DELAY
The signal from all input channels is sent to the
built-in digital delay and then sent to the Speaker
output. There are three knobs to control the
digital delay:
• LEVEL
Adjusts the amount of the effect in the overall
sound. Turn the knob to the right to increase the
amount of effect.
• TIME
Adjusts the time interval of the delay. Turn this
knob to the right to increase the time interval
between two delays.
• REPEAT
Adjusts how long the delay sustains. Turn this
knob to the right to make the delay repeat for
longer.
3
-∞dB
0dB
-∞dB
0dB
CHANNEL 2
-∞dB
0dB
-∞dB
0dB
CHANNEL 5
9
10
4
5
-∞dB
0dB
-∞dB
0dB
U ALL
0001 : SONG_TITLE_
CHANNEL 3
DELAY FX
CONTROL
-∞dB
0dB
CHANNEL 6
11
12
13
14
5. EQ
The signal from all input channels will go
through this equalizer and then to the Speaker
output. this is controlled by 3 knobs (SZPA-410)
or a 5-band fader EQ (SZPA-612 and SZPA-
815).
6. USB/SD DIGITAL PLAYER
Use these controls to play MP3 music files on
your connected USB flash drive or SD card.
Please see Digital Media Player section for
more information).
7. USB PORT & SD CARD SLOT
Connect your USB flash drive or SD card to play
MP3 music files.
8. MIC INPUT (BALANCED)
Connect a dynamic microphone here using a
standard XLR cable.
9. LINE INPUT
Connect a guitar, synth, keyboard, drum
machine, CD player or other media device here
with a standard ¼" TS cable.
10. EFFECT
Adjust this knob to control the signal level
which will be sent to the built-in digital delay.
5
6
7
00:01
-∞dB
0dB
-∞dB
0dB
15 16
17
18
Publicidad
