Cleaning And Maintenance - physa US-5 Manual De Instrucciones

Power [W]
Frequency [MHz]
Operating time
PURPOSE
This ultrasound massager is designed for a broad range of applications in the cosmetics industry.
In case of damage resulting from an improper use of the device, the user shall assume all liability.
BEFORE FIRST USE
On receipt of the parcel, make sure the packaging is undamaged before opening it. If the packaging is damaged, please contact
your transport company and distributor within 3 days. Be as specific as possible when describing the damages. Do not turn
the package upside down! When transporting the package, please ensure that it is kept horizontal and stable. The packaging
materials (cardboard, plastic straps, polyurethane foam) should be kept at hand, so that the device can be sent back to the
service center, if needed, in the best conditions!
ENVIRONMENT OF USE
The room temperature must not be higher than 45°C and the relative humidity should be under 85%. Keep the device away
from hot surfaces. Operate the device on flat, stable, clean, refractory and dry surfaces, out of the reach of children and
people with mental disabilities. Make sure that the power outlet is always within reach. The power outlet must be properly
grounded and match the technical requirements of the device.
OPERATING PRINCIPLE
2
1
3
4
5
6
7
8
1. ultrasound mode selector (continuous / pulsating / mixed mode)
2. head
3. ultrasound intensity selector (high intensity ultrasounds / medium intensity
ultrasounds / low intensity ultrasounds)
4. main switch
5. ultrasound mode indicator:
continuous light - continuous ultrasound mode
light flashing at regular intervals - pulsating ultrasound mode
light alternately flashing / continuous (combination of the above modes) -
mixed ultrasound mode
6. ultrasound intensity indicator - low intensity ultrasounds
7. ultrasound intensity indicator - medium intensity ultrasounds
8. ultrasound intensity indicator - high intensity ultrasounds
BEFORE USE
Wash thoroughly the body parts on which you want to use the massage device. Moisten them with water, cream, ultrasound
treatment gel or massage oil (ultrasound waves spread more easily in a wet environment). Using the device on dry skin might
reduce the effectiveness of the treatment.
1
Plug the device in and turn on the main switch. Select the appropriate ultrasound mode and level of intensity. The device
starts automatically and shuts off automatically after 15 minutes. During use, the head of the device should be kept constantly
in movement!
Rev. IV 2016
All manuals and user guides at all-guides.com
5
1
15 minutes (automatic shutdown)
8
After use, thoroughly disinfect the device's head (using disinfection wipes or disinfectant) and dry it.
After use, use a clean cloth to wipe any gel / cream / massage oil residues off the skin.
Do not keep the device in one spot without moving it. After use, it is recommended to leave the device disconnected for
about 30 minutes.
TRANSPORTATION AND STORAGE
When transporting the device, avoid shaking it, dropping it and turning it upside down. Store it in a cool, dry place, free of
any corrosive gas.

CLEANING AND MAINTENANCE

• Unplug the device before cleaning.
• Use a mild, non-corrosive detergent.
• Let the device dry before using it again.
• Store the device in a dry, cool location, free from moisture and direct sunlight.
• The head should be kept clean.
REGULAR CONTROL OF THE DEVICE
Regularly ensure that the device is in good condition. Should it be damaged, please stop using it immediately and contact
your customer service to solve the problem.
What to do in case of problem?
Please contact your customer service and prepare the following information:
• Invoice number and serial number (the latter is to be found on the technical plate on the device).
• If relevant, a picture of the damaged, broken or defective part.
• It will be easier for your customer service advisor to identify the source of the problem if you give a detailed and
precise description of the matter.
The more details you give, the quicker the customer service will be able to solve your problem!
CAUTION: Never open the device without the authorization of your customer service. This may void the guarantee!
Rev. IV 2016
9 9