Cleaning And Maintenance - Sonia Maia Ultra Manual Del Usuario

● Set the timer using the
to choose the operating time of the machine, in a
range of between 1 and 30 minutes.
● Set the power using the
to choose the power of the machine, in a range of
between 1 and 9.
● Probe selection: use the
ultrasound probe to be used.
- When the
probe is selected.
- When the
probe is selected.
- When the
probe is selected.
● Wave type selection: use the
select the type of probe.
- When the
wave selected is continuous.
- When the
wave selected is discontinuous.
- When the
wave selected is pulse.
● Use the
device.
- When running, the
- When paused or on standby, the
light up.
OPERATION
● Connect the device and leave it in standby mode
with the indicator lit.
● Thoroughly clean the area of skin to be treated
with the appropriate product according to skin
type and remove any remaining product which may
prevent it from penetrating again when applying the
ultrasound treatment.
● Apply conductive gel across the whole area to be
treated.
● Select the probe to be used (face, body or eyes), the
operating time and set the power to minimum.
● Hold the handpiece of the ultrasound probe and
press
up.
● Massage the area to be treated with small circular
movements for the previously selected treatment
time, setting the desired power.
Bear in mind:
● Never use on dry skin. Always apply enough
conductive gel for the entire treatment time.
● The treatment time should never be longer than
EN
4
or buttons
or buttons
button to select the
indicator lights up, the face
indicator lights up, the body
indicator lights up, the eye
button to
indicator lights up, the type of
indicator lights up, the type of
indicator lights up, the type of
button to start or stop the
indicator will light up.
indicator will
. The run indicator will light
15 minutes and the power used should not be too
high. Set the time and power according to the area
of skin to be treated.

CLEANING AND MAINTENANCE

● Before cleaning the device, unplug it from the
mains.
● Clean the device with a soft, dry cloth. Do not use
liquids to clean it.
● After each use, the various components and
accessories must be sterilised and left to dry.
● For maintenance or repairs of any part of the
product, please contact your distributor or
specialised technician.
RECYCLING
If you need to dispose of the product or any of its
parts or accessories, please check and respect the
laws and regulations applicable to waste management
and environmental protection.