HOW TO USE THIS AIR COOLER
Control Panel
Speed:
Press the "1" "2" "3" button to change speed. "0" button is for turning the unit OFF.
"0" – Off
"1"- Minimum
"2"- Medium
"3"-Máximum
Cool
"Cool" button repeatedly to choose the desired function. the functions can operate simultaneously.
Press
To begin cooling the desired area, press the button on
will feel the cooler air after the honeycomb media is completely wet.
Swing
"Swing" function is chosen, the vertical louvers will automatically move from right to left, but the
When
horizontal louvers must be manually adjusted to change the air flow direction to top, centre or bottom.
Filling with water
Caution: Always unplug from power supply when filling with water.
- Check water level indicator located on the front of the unit to determine the level of water inside
the water tank. Be sure water in the tank is always above the minimum water level mark.
- To fill the water tank, remove the water tank and fill water to the Max Level, as indicated on the
water tank. Do not fill water above the Max water level mark.
All manuals and user guides at all-guides.com
23
"COOL" is on. Water pump will start to operate and you