Troubleshooting; Corrective Action; Cleaning And Maintenance - LF HIGHLAND MC-DY3020Power101 Manual Del Usuario

TROUBLESHOOTING

PROBLEM
The heating
plate stops
functioning
Working
light is
always
off
The heating
plate starts
functioning
The
The heating
working
plate stops
light is
functioning
always
on and
The heating
never
plate starts
off
functioning

CLEANING AND MAINTENANCE

• Please be sure to unplug the power cord plug after each use, wait for a few minutes
after power has been turned off, and then wipe it with a damp cloth. If it is stored for a
long time, it should be cleaned with detergent.
• Do not use abrasive cleaning products or solvents for cleaning.
• After use, the oil in the product baking tray should be poured out, and it should be
replaced with clean oil when cooking each time.
• Do not put the product in water for cleaning in case of electric shock and malfunction.
• Dry all components before storage and put the product in a safe and dry place.
• Any other servicing should be performed by an authorized service representative.
POSSIBLE CAUSE
1. The power supply is not
connected
2. Internal wire is disconnected
3. Fuse is burnt out
4. The temperature controller is
damaged
Indicator light is damaged
1. The electric heating pipe is
damaged
2. Internal wire is disconnected
The temperature controller is
damaged

CORRECTIVE ACTION

1. Check whether the switches,
plugs, sockets, power leads are
intact or not, and ensure that the
plugs and sockets are in right place.
2, 3, 4 send to the designated
maintenance department for
maintenance
Send to the designated
maintenance department for
maintenance
Send to the designated
maintenance department for
maintenance
Send to the designated
maintenance department for
maintenance
9